• Disconnect battery, and remove write connections from the motor. Disconnect throttle cable and push thru blower housing. Disconnect fuel line, and push to underside off car. Disconnect spark plug wires just to get them out of the way. 
  • Jack the car and place on jack stands. Remove two motor mount bolts from underside of car. Place jack under motor while loosening the upper motor mount bolts. 
  • Removing the motor is a matter of pulling out away from tranny, the allowing the motor down to the ground. 
  • To remove the clutch / flywheel from the motor, a 36mm socket is required to remove the gland nut, and this tool to lock the flywheel in position: https://www.jbugs.com/product/5003.html